360 H 100 DOUBLE SIDED TIMING BELT

Double sided timing belts can transmit power on both sides making in useful for reversing applications. Double sided timing belts are produced using the same materials as single sided belts, except that the backside is ground from a fibre reinforced special rubber compound. Total belt rating is the same as for single sided belts.

Here are some of the benefits of using industrial timing belts over V belt drives or steel chain drives:
1. High mechanical efficiency, as much as 98% when properly maintained. By contrast, chain drives are in the 91-98% efficiency range, while V-Belts average in the 93-98% range.
2. Power transmission efficiency is not lost by use of timing belts 
3. Clean operation, no need for lubrication
4. Reduced noise
5. No Rust Corrosion in damp environments.
6. John Brooks can design the perfect match for speed reduction or speed step up drives as well as precision positioning for automation applications. Complete range of tooth geometry’s are available such as HTD, HPPD, Trapezoidal with steel and Kevlar cords. 

For New Zealand placed web orders : Min Fee $10 Shipping Nationwide.

Note: Rural addresses we will add a small surcharge.